|
| |
TM 5-2420-222-20-3
HYDRAULIC PUMP-TO-HYDRAULIC OIL COOLER OIL LINE (SERIAL NUMBERS 235786 THRU 235999 ONLY) -
CONTINUED
ACTION
LOCATION
ITEM
REMARKS
19. Hose (5)
Two clamps (6)
Using 3/16-inch flat-tip screwdriver,
tighten.
20. Loader backhoe
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
21.
Engine
Start and run at high idle
(TM 5-2420-222-10).
22.
Hydraulic pump-to-
a.
Check for leaks.
hydraulic oil
b.
If leaking at any connection, tighten
cooler line
using 3/16-inch flat-tip screwdriver.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace defective clamp, hose or oil
line as outlined in this task.
d.
If found leaking, repeat steps 20
thru 22.
23.
Engine
If still running, shut down
(TM 5-2420-222-10).
2-1345
|
