|
| |
TM 5-2420-222-20-3
HYDRAULIC PUMP-TO-HYDRAULIC OIL COOLER OIL LINE (SERIAL NUMBERS 235786 THRU 235999 ONLY) -
CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Install hood (page 2-1025).
2. Remove loader bucket support (page 2-1830).
TASK ENDS HERE
HYDRAULIC OIL FILTER RELIEF VALVE-TO-CLUTCH CONTROL VALVE ADAPTER OIL LINE
This task covers:
a. Removal (page 2-1346)
d. Inspection/Replacement (page 2-1348)
b. Disassembly (page 2-1347)
e. Assembly (page 2-1349)
c. Cleaning (page 2-1345)
f. Installation (page 2-1350)
INITIAL SETUP:
Tools
Personnel Required
Pan, drain
One
Screwdriver, flat-tip, 1/4-inch
Vise, machinist’s
Equipment Condition
Wrench, open-end, 1 1/2-inch
1.
Hydraulic system pressure released
Materials/Parts
(page 2-1191)
2.
Hydraulic oil filter removed
Detergent, GP (item 7, Appendix C)
(page 2-1698)
Rags, wiping (item 21, Appendix C)
Solvent, drycleaning
(item 28, Appendix C)
Tags, marking (item 30, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Clutch adapter (1)
Elbow (2) with
a.
Place drain pan underneath.
assembled parts
b.
Using 1 1/2-open-end wrench, unscrew
and take off.
c.
Cap clutch adapter (1) (page 2-137).
2-1346
|
