|
| |
TM 5-2420-222-20-2
REFLECTORS (SERIAL NUMBERS 319995 THRU 342573 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
4. Lamp plate (1)
Reflector (2)
a. If removed, apply metal adhesive in
0.06 to 0.18-inch (1.52 to 4.57 mm)
wide beads in 2.00-inch (50.8 mm) or
smaller squares.
Make sure that outside bead Is within
0.25-inch (6.35 mm) of edge with no
gaps.
b. Line up and press into place to transfer
some metal adhesive.
c. Take off and allow metal adhesive to
set for two minutes.
d. Line up and press firmly into place.
TASK ENDS HERE
TA243299
2-1181
|
