|
| |
TM 5-2420-222-20-2
COWL FRONT COVER - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Install hood (page 2-1025).
TASK ENDS HERE
HOOD
This task covers:
a.
Removal (page 2-1026)
e.
Repair (page 2-1030)
b.
Disassembly (page 2-1028)
f.
Assembly (page 2-1031)
c.
Cleaning (page 2-1029)
g.
Installation (page 2-1032)
d.
Inspection/Replacement (page 2-1030)
INITIAL SETUP:
Tools
Personnel Required
Hammer, ball-peen, 1-pound head
Two
Handle, ratchet, 3/8-inch drive
Knife, putty
Equipment Conditions
Punch, drive pin, straight, 1/8-inch
Socket, 3/8-inch drive, 9116-inch
1.
Muffler extension stack assembly removed
Threading set, screw
(page 2-347)
Wrench, open-end, 1/2-inch
2.
Side grilles removed (TM 5-2420-222-10)
Materials/Parts
NOTE
Adhesive, metal bonding
The following only applies to
(item 1, Appendix C)
loader backhoes with Serial Numbers
Detergent, GP (item 7, Appendix C)
319995 thru 342573.
Lockwasher, hood reinforcement
screw (four required)
3.
Engine starting aid fluid injection
Rags, wiping item 21, Appendix C)
solenoid removed (page 2-296)
Screw, drive, vandal cover (four
required)
Solvent, cleaning compound (item 27,
Appendix C)
Solvent, drycleaning (item 28,
Apendix C)
2-1025
|
