|
| |
TM 5-2420-222-20-2
HOOD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Grille housing (1)
Two stop nuts (3)
Using 1/2-inch open-end wrench, unscrew
and two eye
and washers (4)
and take off.
bolts (2)
2.
Hood (5), two
Two screws (8) and
a.
Using 9/16-inch, 3/8-inch drive socket
reinforcement
lockwashers (9)
and ratchet handle, unscrew and take
plates (6), and
out.
two retainers (7)
b.
Get rid of lockwashers (9).
3.
Hood (5)
Vandal cover (10)
Open.
WARNING
Be careful when removing radiator cap. If engine is hot, escaping steam could
burn you. Use a rag to cover radiator cap to protect your hand. Unscrew cap just
enough to allow any built-up steam to escape. When all pressure has been
relieved, unscrew cap the rest of the way, and take it off of radiator.
4.
Radiator (11)
Filler opening
a.
Unscrew to radiator filler neck stop.
cap (12)
b.
Push down, unscrew and take off.
WARNING
No open flames, welding, grinding, smoking, or use of heat producing devices
permitted near fuel tank and fuel lines during maintenance unless the fuel tank
has been cleaned and purged of all flammable liquids and vapors. Fuel burns
easily and fumes are explosive. Keep battery disconnected. Failure to observe
these precautions could cause serious injury.
5.
Fuel tank (13) and
Fuel cap (15)
Unscrew and take off.
grommet (14)
6.
Fuel tank (13) and
Grommet (14)
Take off.
hood (5)
7.
Grille housing (1)
Hood (5)
With help of assistant, take off.
and cowl (16)
2-1026
|
