|
| |
TM 5-2420-222-20-2
FRONT WHEEL BEARINGS AND HUBS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
NOTE
Step 25 only applies to loader backhoes with Serial Numbers 235786 thru 235999.
Replace lubrication port plug with new lubrication fitting during assembly.
25.
Hub cap (1)
Lubrication
Screw in and tighten using 5/16-inch,
fitting (2)
1/2-inch drive socket and ratchet handle.
NOTE
Step 26 only applies to loader backhoes with Serial Numbers 319995 thru 342576.
Replace lubrication port socket-head screw with new lubrication fitting during assembly.
26.
Hub (3)
Lubrication
Screw in and tighten using 5/16-inch,
fitting (4)
1/4-inch drive socket and ratchet handle.
27.
Hub (3 or 5)
Outer cup (6) and
Using 1-pound head ball-peen hammer and
inner cup (7)
3/4-inch brass-tipped driftpin, tap in.
TA243167
2-919
|
