|
| |
TM 5-2420-222-20-2
FRONT WHEEL BEARINGS AND HUBS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
19.
All bearings
Clean (TM 9-214).
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use
only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe
vapors. Do not use near open flame or excessive heat. The flashpoint is 1000F to 138°F (38° to
590C). If you become dizzy while using cleaning solvent, get fresh air immediately and get
medical aid. If contact with eyes is made, wash your eyes with water and get medical aid
immediately.
20.
All metal parts
a.
Clean in drycleaning solvent.
except bearings
b.
Using clean, dry rags, wipe dry.
INSPECTION/REPLACEM ENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-
137).
Replace defective parts which cannot be repaired.
21.
All bearings
Inspect (TM 9-214).
22.
All other metal
Look for cracks, bends, and breaks.
parts
23.
All threaded parts
Look for cracks, bends, breaks, and
damaged threads.
REPAIR
24.
All threaded parts
If threads are damaged, using screw
except attaching
threading set, restore threads.
hardware.
2-918
|
