|
| |
TM 5-2420-222-20-2
HYDRAULIC OIL COOLER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only in
a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors. Do not use
near open flame or excessive heat. The flashpoint is 100°F to 138°F (38° to 59°C). If you become dizzy
while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is made,
wash your eyes with water and get medical aid immediately.
13.
All other parts
a.
Clean in drycleaning solvent.
b.
Using clean, dry rag, wipe dry.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-137).
Replace defective parts which cannot be repaired.
14.
Oil cooler
Inspect (TM 750-254).
15.
Two baffles
Look for tears and crumbling.
(2 and 3)
16.
Rubber washer (4)
Look for tears, cracks, and crumbling.
17.
All other parts
Look for cracks, breaks, and abnormal
bends.
TA243132
2-845
|
