THERMOSTAT HOUSING AND COVER - CONTINUED -624880456

TM 5-2420-222-20-1

THERMOSTAT HOUSING AND COVER - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

10. Cylinder head (4)

Gasket (5) and

Put in place.

housing (1)

11. Housing (1) and

Two screws (6) and

a. Screw In and alternately tighten until

cylinder head (4)

snug using 9/16-inch, 3/8-inch drive

socket and ratchet handle.

b. Using 0 to 60 N-m capacity, 3/8-inch

drive torque wrench, alternately tighten

to 20 foot-pounds (27.1 N.m) torque.

NOTE

FOLLOW-ON MAINTENANCE:

1. Install thermostat (page 2-396).

2. Install thermostat hoses and clamps (page 2400).

TASK ENDS HERE

2-395