RADIATOR - CONTINUED
Four packing strips
a. If removed, apply metal adhesive In
(2, 3, 4, and 5)
0.06 to 0.18-inch (1.52 to 4.57 mm)
wide beads, in 2.00-inch (50.8 mm)
or smaller squares.
Make sure that outside beads are
in 0.25-inch (6.35 mm) of where
edge of packing will be.
b. Press against radiator (1) to transfer
some metal adhesive.
c. Take off and allow metal adhesive to
set for two minutes.
d. Press firmly into place.
Put into place on filler neck.