 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-222-20-1
RADIATOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
40.
Tie rod (1)
New special
a. Secure tie rod (1) is machinist's vise.
nut (2) and
b. Using 9/16-inch open-end wrench,
washer (3)
screw on all the way.
c. Take tie rod (1) out of machinist's vise.
41.
Radiator (4)
Overflow hose (5)
a. Push onto nipple on radiator neck.
b. Push into clips.
42.
Draincock (6)
Screw in and tighten using 9/16-inch
open-end wrench.
43.
Oil cooler (7)
Put on.
with assembled
packings
44.
Oil cooler (7)
Four washers (8),
Screw on and tighten using 1/2-inch
and radiator (4)
new lockwashers (9),
open-end wrench.
and nuts (10)
INSTALLATION
45.
Front support (11)
Packing (12) and
a. If removed, apply metal adhesive in
baffle (13)
0.06 to 0.18-inch (1.52 to 4.57 mm)
wide beads.
Make sure that outside beads are with-
in 0.25-Inch (6.35 mm) of where
edge of baffle will be.
b. Press against front support (11) to
transfer some metal adhesive.
c. Take off and allow metal adhesive to
set for two minutes.
d. Press firmly into place.
46.
Two rubber washers
Put in place.
(14 and 15)
47.
Fan (16)
Fan shroud (17)
Hang on.
2-380
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals