This task covers:
a. Removal (page 2-254)
Inspection/Replacement (page 2-258)
b. Disassembly (page 2-256)
e. Assembly (page 2-258)
c. Cleaning (page 2-256)
f.Installation (page 2-259)
Materials/Parts - Continued
Rags, wiping (item 21, Appendix C)
Handle, ratchet, 318-inch drive
Solvent, drycleaning (item 28, Appendix C)
Tags, marking (item 30, Appendix C)
Screwdriver, flat-tip, 3/16-inch
Socket, deep, 3/8-inch drive,
Wrench, open-end, 7/16-inch
Wrench, open-end, 1/2-inch
Wrench, open-end, 5/8-inch
1. Grille housing removed (page 2-1035)
2. Air cleaner removed (page 2-237)
Detergent, GP (item 7, Appendix C)
3. Battery ground cable disconnected
Lockwasher, terminal screw
Terminal (1) and
a. Using 3/16-inch flat-tip screwdriver,
unscrew and take out.
and washer (5)
b. Get rid of lockwasher (4).
a. Take off.
b. Tag (page 2-237).
No open flames, welding, grinding, smoking, or use of heat producing devices permitted near fuel
tank and fuel lines during maintenance unless the fuel tank has been cleaned and purged of all
flammable liquids and vapors. Fuel burns easily and fumes are explosive. Keep battery
disconnected. Failure to observe these precautions could cause serious Injury.