|
|
TM 5-2410-237-23
BLADE CONTROL VALVE (LIFT AND TILT) REPAIR - CONTINUED
0245 21
ASSEMBLY
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Blade control valve assembly weighs approximately 150 lb (68 kg) when fully assembled.
Lightly coat all components of blade control valve with clean oil before assembly.
1.
Install new O-ring (118) on plug (115) and install
115
valve (117), new spring (116) and plug in main valve
body (30).
116
117
2.
Install new seal (114) on plug (111) and install valve
30
(113), new spring (112) and plug in main valve body
(30).
118
3.
Repeat step 2 for second plug (111).
114
111
113
112
421-0068
Change 1
0245 21-8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |