 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE CONTROL VALVE (LIFT AND TILT) REPAIR - CONTINUED
0245 21
DISASSEMBLY - CONTINUED
48.
Remove plug (111), spring (112) and valve (113) from
115
main valve body (30). Remove seal (114) from plug.
Discard seal and spring.
116
117
49.
Repeat step 48 for second plug (111).
30
50.
Remove plug (115), spring (116) and valve (117) from
main valve body (30). Remove O-ring (118) from
118
plug. Discard O-ring and spring.
114
111
113
112
421-0068
CLEANING AND INSPECTION
WARNING
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic
material. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in
well-ventilated areas. Keep away from open flames and other sources of ignition. Failure to follow this
warning may cause injury or death.
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure
when drying parts with compressed air. DO NOT direct compressed air against human skin. Failure to
follow this warning may result in injury. Make sure air stream is directed away from user and other
personnel in the area. To prevent injury, user must wear protective goggles or face shield.
1.
Clean all parts in solvent cleaning compound. Ensure all passages in valve bodies are clean.
2.
Thoroughly dry all parts and all passages in valve bodies with compressed air.
3.
Inspect parts for cracks, breaks, distortion or other damage IAW WP 0241 00.
4.
Check all valves for irregular scoring. Replace if necessary.
5.
Check for free movement of spool valves in valve body bores.
6.
Replace damaged or defective parts.
0245 21-7
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals