CLEANING AND INSPECTION - TM-5-2410-237-231552

TM 5-2410-237-23

WINCH CONTROL VALVE REPAIR - CONTINUED

0245 20

CLEANING AND INSPECTION

WARNING

Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic

material. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in

well-ventilated areas. Keep away from open flames and other sources of ignition. Failure to follow this

warning may cause injury or death.

Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure

when drying parts with compressed air. DO NOT direct compressed air against human skin. Failure to

follow this warning may result in injury. Make sure air stream is directed away from user and other

personnel in the area. To prevent injury, user must wear protective goggles or face shield.

Clean all parts and surfaces with solvent cleaning compound. Dry parts with compressed air.

Inspect all parts for wear, pitting, cracks or corrosion and replace if necessary.

Inspect oil passages to ensure they are clean and unobstructed. Inspect for corrosion, pitting and damage. Replace as

necessary.

Change 1

0245 20-8