 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
WINCH ASSEMBLY REPAIR - CONTINUED
0245 19
DISASSEMBLY - CONTINUED
NOTE
Place a suitable container under drum to catch any residual oil that may drain.
ac.
Place pry bar through lifting links. Pull drum support flange (33) from drum (30).
ad. Fasten wire from one lifting link to boss outside case (5), to keep drum support flange (33) in position when drum
(30) is removed.
CAUTION
Use caution when handling drum to prevent damage to equipment.
ae.
Use lifting equipment to remove drum (30) from case (5).
af.
Remove six bolts (46) from bearing retainer (47) and drum (30).
ag. Install two forcing screws of correct size and remove retainer (47) from drum (30).
ah. Remove seal (48) from retainer (47). Discard seal.
ai.
Remove two bearing cones (49 and 50) from drum (30).
aj.
Remove two bearing cups (51 and 52) from retainer (47) and drum (30).
ak. Remove O-ring (53) from drum (30). Discard O-ring.
NOTE
Drum support flange weighs 81 lb (37 kg).
al.
Fasten lifting equipment to drum support flange (33). Remove wire and lifting links and remove drum support
flange.
am. Remove seal (54) from case (5). Discard seal.
an. Inspect drum support flange (33) contact area for damage. Replace drum support flange if damaged.
54
33
53
32 30
31
52
50
5
49
51
46
47
48
421-0213
0245 19-9
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals