|
|
TM 5-2410-237-23
TORQUE DIVIDER REPAIR - CONTINUED
0245 14
DISASSEMBLY - CONTINUED
20.
Use two pry bars to apply pressure evenly on both
19
sides of stator (19) until stator slides off of impeller
(16).
16
421-0163
21.
Turn impeller assembly (16) over.
20
22.
Remove carrier assembly (20) by applying equal pres-
sure with two pry bars on both sides of carrier assem-
bly.
16
421-0164
23.
Remove ring (21) that holds bearing (22) in position.
20
24
Discard ring.
22
21
24.
Turn carrier assembly (20) over. Remove bearing (22).
25.
Remove two seals (23) and oil director (24) from car-
rier assembly (20). Discard seals.
23
421-0165
26.
Remove eight capscrews (25) that hold gear (26) to
16
impeller (16).
26
28
27.
Remove gear (26).
28.
Remove carrier (27) from impeller (16). Remove ring
(28) that holds bearing (29) in position in carrier.
29.
Remove bearing (29) from carrier (27).
25
27
29
421-0166
0245 14-5
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |