|
|
TM 5-2410-237-23
TORQUE DIVIDER REPAIR - CONTINUED
0245 14
DISASSEMBLY - CONTINUED
14.
Insert two 3/8-16NC forcing screws at location (A).
15.
Slowly turn forcing screws until impeller (16) separates from housing (17).
16.
Remove forcing screws and install two lifting links in impeller (16) with capscrews (14) and attach lifting device.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death.
NOTE
Impeller weighs 54 lb (24 kg).
17.
Lift impeller (16) from housing (17) assembly.
FORCING
FORCING
SCREW
SCREW
A
LIFTING
A
LINKS
16
16
17
17
421-0161
421-0160
18.
Turn impeller (16) over.
18
19.
Remove eight capscrews (18) that hold stator assem-
19
bly (19) in position.
16
421-0162
0245 14-4
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |