|
|
TM 5-2410-237-23
TORQUE DIVIDER REPAIR - CONTINUED
0245 14
DISASSEMBLY - CONTINUED
30.
Remove ring (30).
31.
Remove turbine (31) and spacer (32) from housing (17).
32.
Turn housing (17) over.
33.
Remove two pins (33).
34.
Compress ring (34) and remove gear (35). Discard ring.
35.
Install two 3/8-16NC forcing screws in flange assembly (36) and separate flange assembly from housing (17).
36.
Remove seal (37) from flange assembly (36). Discard seal.
37.
Remove two bearings (38) from flange (36).
NOTE
Do not remove carrier from flange unless it will be replaced due to damage.
38.
If packing retainer (39) is to be removed, use a chisel to break carrier and remove it.
39.
Remove six capscrews (40) from retainer (41).
40.
Remove retainer (41) from housing (17).
41.
Remove ring (42) that holds bearing (43) in position.
42.
Remove bearing (43) from housing (17).
17
41
42
31
43
32
40
30
34
35
38 33
38
421-0167
36
39
37
0245 14-6
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |