|
|
TM 5-2410-237-23
GOVERNOR REPAIR - CONTINUED
0245 12
ASSEMBLY - CONTINUED
38.
Install lever (21), lever (20) and shaft assembly (19) in governor (6).
39.
Install spring (18), new O-ring (17), low idle adjustment screw (16) and new O-ring (15).
40.
Use armature to install new seal (14). Install seal 0.08 0.06 in. (2.0 1.5 mm) below surface of cover.
41.
Install new gasket (13), cover (12) and six bolts (11).
42.
Install new washer (10), two new washers (9), new seat (8) and new spring (7).
43.
Install governor (5) to housing (3) with two bolts (6).
44.
Install new gasket (5), housing (4), four screws (2) and four bolts (1) on governor (5).
4
3
6
5
8
20,21 (HIDDEN)
10
7
1
9
13
12
11
19
17
2
16 18
14
15
421-0225
Adjust governor (WP 0057 00).
45.
46.
Install fuel injection pump housing and governor (WP 0055 00).
END OF WORK PACKAGE
0245 12-15
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |