 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
HYDRAULIC TANK REPLACEMENT - CONTINUED
0226 00
REMOVAL - CONTINUED
4.
Remove two self-locking nuts (7) and capscrews (8) from top corners of tank (5). Do NOT discard self-locking nuts.
5.
Secure two lifting links (9) to tank (5) and reinstall capscrews (8) and self-locking nuts (7).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Hydraulic tank weighs 248 lb (113 kg).
6.
Attach a nylon sling and a suitable lifting device to lifting links (9) to support tank (5).
7.
Remove two capscrews (10), spacers (11) and washers (12) from tank (5) on underside of fender.
8.
Use nylon sling and lifting device to remove tank (5)
5
7,8
from fender.
9.
Remove two self-locking nuts (7), capscrews (8), and
lifting links (9) from tank (5), if a new tank is to be
installed.
10.
Remove filter assembly and filler strainer from tank
(5) if a new tank is to be installed (WP 0218 00).
7,8,9
7,8,9
INSTALLATION
3
CAUTION
6 (HIDDEN)
1,2
Wipe area clean around openings in tank
and hydraulic hoses before installation, to
10,11,12
ensure contamination does not enter
4
hydraulic system.
1.
If removed, install filter assembly and filler strainer to
tank (5) (WP 0218 00).
2.
If installing a new tank (5), remove two self-locking
nuts (7) and capscrews (8) from top corners of new
387-495
tank. Do NOT discard self-locking nuts.
3.
Secure two lifting links (9) to tank (5) and reinstall two capscrews (8) and self-locking nuts (7).
0226 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals