Click here to make tpub.com your Home Page

Page Title: INSTALLATION
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home
   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 5-2410-237-23
HYDRAULIC TANK REPLACEMENT - CONTINUED
0226 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Hydraulic tank weighs is 248 lb (113 kg).
4.
Attach a nylon sling and a suitable lifting device to lifting links (9) to support tank (5).
5.
Use nylon sling and lifting device to position tank (5) on fender, with mounting holes in tank aligned with holes in
fender.
NOTE
Mounting hardware is installed from underside of fender.
6.
Install tank (5) on fender with two washers (12), spacers (11) and capscrews (10).
7.
Remove two self-locking nuts (7), capscrews (8) and lifting links (9) from top of tank (5). Discard self-locking nuts.
8.
Reinstall two capscrews (8) and new self-locking nuts (7) to tank (5).
NOTE
Lightly coat new O-rings in hose connections with clean oil before installation.
9.
Install new O-ring (6) and hydraulic pump hose (4) on tank (5) with flange halves (3), four washers (2) and capscrews
(1).
10.
Install remaining hydraulic hoses to tank (5), using new O-rings at hose connections.
11.
Install blade control valve (WP 0201 00).
END OF WORK PACKAGE
0226 00-3

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business