|
|
TM 5-2410-237-23
STEERING CLUTCH CONTROL VALVE MAINTENANCE - CONTINUED
0154 00
ASSEMBLY - CONTINUED
12.
Apply a light film of clean oil to new O-ring (53) and install O-ring on plug (52).
13.
Use a 3/8 in. capscrew to install plug (52) in end of spool housing (31).
14.
Install retaining ring (51) to secure plug (52).
15.
Repeat steps 12-14 for other plug (52).
16.
Install spring (50), washer (49) and retaining ring (48) on one end of spool valve (44).
17.
Install piston (47) and slug (46) in other end of spool valve (44).
18.
Apply a light film of clean oil to spool valve (44) and install spool valve and spring (45) in spool housing (31).
19.
Install washer (43), spring (42) and bushing (41) over spool valve (44).
20.
Repeat steps 16 through 19 for other spool valve (44).
WARNING
Spool and lever housings are spring-loaded. Assemble housings carefully to prevent personal injury or part
damage.
21.
Apply pressure to two bushings (41) and install washer (40), new lockwasher (39) and capscrew (38) in spool housing
(31) to secure both spool valve assemblies.
22.
Install two retaining rings (37) on plungers (36) and insert plungers into spool housing (31) over end of spools.
38
37
41
43
42
31
39
40
36
48
49
51
50
44
47
387-739
46
45
52 53
0154 00-8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |