|
|
TM 5-2410-237-23
STEERING BRAKE HYDRAULIC CONTROL ASSEMBLY MAINTENANCE - CONTINUED
0151 00
DISASSEMBLY - CONTINUED
16.
Remove retainer (76), plunger (77), outer spring (78) and inner spring (79) through end of hydraulic control (12).
17.
Remove retaining ring (80) from plunger (77).
18.
Remove retaining ring (81), valve (82) and valve spring (83) from other end of plunger (77).
19.
Remove piston (84) and spring (85) from hydraulic control (12).
20.
Remove sleeve (86) from hydraulic control (12).
84
85
81
86
76
82
80
83
77
12
79
387-713
78
21.
Remove cotter pin (87), washer (88), pin (89) and two links (90) from parking brake lever assembly (91). Discard cotter
pin.
22.
Remove pin (92) from pawl (93) and shaft of parking brake lever assembly (91).
23.
Tap shaft of parking brake lever assembly (91) to knock plug (94) out hydraulic control (12). Remove parking brake
lever assembly and pawl (93). Discard plug.
90
93
91
89
90
87
92
88
94
12
387-714
0151 00-9
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |