 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
STEERING BRAKE HYDRAULIC CONTROL ASSEMBLY MAINTENANCE - CONTINUED
0151 00
REMOVAL - CONTINUED
1.
Remove three capscrews (1) and lockwashers (2) from one end of fender brace (3). Discard lockwashers.
2.
Repeat step 1 for other end of fender brace (3).
3.
Remove three capscrews (4), lockwashers (5) and washers (6) from center of fender brace (3). Discard lockwashers.
3
1,2
4,5,6
387-704
3
7
8
4.
Remove spring (7) from fender brace (3) and fuel
shut-off lever (8).
5.
Tap fender brace (3) on underside to break it loose and
9,10
remove fender brace.
6.
Remove cotter pin (9), pin (10) and end of brake con-
11
trol rod (11) from lever on hydraulic control (12). Dis-
card cotter pin.
12
7.
Repeat step 6 at other end of brake control rod (11)
and remove rod.
15
8.
Remove spring (13) from bracket (14) and lever (15).
9.
Remove cotter pin (16), pin (17) and two links (18)
13
from lever on end of shaft assembly (19). Discard cot-
ter pin.
18
10.
Repeat steps 8 and 9 on other end of shaft assembly
(19).
16,17
11.
Remove two capscrews (20), lockwashers (21) and
bracket (14) from front of hydraulic control (12). Dis-
card lockwashers.
14
387-705
20,21
19
0151 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals