|
|
TM 5-2410-237-23
STEERING CLUTCH LEVERS AND LINKAGE MAINTENANCE - CONTINUED
0148 00
INSTALLATION - CONTINUED
10.
Install one end of rod (17) on bellcrank (19) with pin (16) and new cotter pin (15).
11.
Repeat step 10 for other end of rod (17) at lever (18).
18
16
17
15
16
19
387-397
12.
Install bracket (14) assembly in dash assembly with two capscrews (12) and new lockwashers (13).
13.
Insert rod (10) through rollers in bracket (14) assembly and install handle (11) on rod.
14.
Loosely install nut (9) and rod end (8) on rod (10).
6
8
9
11
15.
Install rod end (8) on lever (18) with pin (7) and new
7
10
cotter pin (6).
16.
Tighten nut (9) against rod end (8).
18
14
12 13
387-396
0148 00-7
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |