|
|
TM 5-2410-237-23
TORQUE DIVIDER SUCTION SCREEN REPLACEMENT - CONTINUED
0106 00
INSTALLATION
1.
Install new gasket (9) on cover (4).
2.
Assemble spacer (7) and suction screen (6) onto stud (8). Install new self-locking nut (5).
NOTE
Ensure bolts are installed in same locations from which they were removed.
3.
Install cover (4), with assembled parts, on underside of flywheel housing with six new lockwashers (3) and bolts (2).
4.
Apply sealing compound to threads of drain plug (1). Install plug and tighten.
5.
Check level of oil in transmission and add as needed (WP 0107 00).
6.
Start engine and check for leaks.
7.
Install crankcase guard (WP 0157 00).
END OF WORK PACKAGE
0106 00-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |