 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TORQUE DIVIDER SUCTION SCREEN REPLACEMENT - CONTINUED
0106 00
REMOVAL - CONTINUED
1.
Remove drain plug (1) and drain oil into a suitable container.
NOTE
Bolts must be installed in same locations from which they were removed. Tag each bolt and its correspond-
ing mounting locations, to ensure correct installation.
2.
Remove six bolts (2), lockwashers (3) and cover (4), with assembled parts, from flywheel housing. Discard lockwash-
ers.
3.
Remove self-locking nut (5) and disassemble suction screen assembly (6) from spacer (7) and stud (8). Discard self-
locking nut.
4.
Remove gasket (9) from flywheel housing or cover (4). Discard gasket.
5
9
6
4
7
3
8
2
1
387-369
2
3
CLEANING AND INSPECTION
WARNING
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-
rial. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-venti-
lated areas. Keep away from open flames and other sources of ignition.
1.
Clean suction screen in solvent cleaning compound IAW WP 0241 00.
2.
Inspect suction assembly for damage IAW WP 0241 00.
3.
Replace any damaged part.
0106 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals