|
|
TM 5-2410-237-23
DIAGNOSTIC (STE-ICE) WIRING MAINTENANCE - CONTINUED
0095 00
REMOVAL
NOTE
Tag wires to ensure correct installation.
1.
Locate faulty wire and trace it back to connector (1).
6
4
Remove solder holding wire to connector and remove
wire (WP 0242 00).
1
2.
Remove four nuts (2), lockwashers (3), capscrews (4)
and cap (5) from dash panel (6). Remove connector
3 2
(1). Discard lockwashers.
5
387-188
3.
To remove shunt (7), remove two screws (8) holding wires (9).
4.
Remove two capscrews (10), lockwashers (11) and starwashers (12). Remove cables (13) from shunt (7).
5.
Remove two capscrews (14), washers (15) and self-locking nuts (16). Remove shunt (7). Discard self-locking nuts.
13
10,11,12 13 10,11,12
14,15,16
387-189
14,15,16
9
8
7
0095 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |