|
|
TM 5-2410-237-23
COOLING SYSTEM SERVICE - CONTINUED
0065 00
FILLING - CONTINUED
3.
Install engine block drain plug (6).
CAUTION
Antifreeze should never exceed 60% by volume. Failure of cooling system can occur.
4.
Mix 12 gal. (45.4 l) of antifreeze solution to provide protection to the lowest expected ambient temperature.
5.
Add coolant slowly, 5 gal. (19 l) per minute or less, until level of coolant is within 1/2 in. (13 mm) of bottom of fill pipe.
6.
With filler cap (2) removed, start engine and run for 15 minutes. Check for coolant leaks. Stop engine and recheck cool-
ant level. Add coolant as needed.
7.
Install filler cap (2). Secure with padlock (1).
8.
Close crankcase guard (WP 0157 00).
1
2
387-204
END OF WORK PACKAGE
0065 00-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |