|
|
TM 5-2410-237-23
COOLING SYSTEM SERVICE - CONTINUED
0065 00
DRAINING - CONTINUED
2.
Install radiator drain tube (3) on drain valve (4).
3.
Place a suitable container beneath drain tube (3) and open radiator drain valve (4).
3
387-206
387-205
4
4.
Place a suitable container under transmission oil cooler and remove transmission oil cooler drain plug (5). Allow all
coolant solution to drain.
5.
Place a suitable container under engine block and remove drain plug (6). Allow all coolant solution to drain.
6
387-207
5
387-208
FLUSHING
1.
Flush system with clean water. DO NOT run engine while flushing.
NOTE
Refer to TB 750-651 for use of engine cooling system cleaning compound.
2.
Use engine cooling system cleaning compound when necessary to clean heavily rusted or partially clogged cooling sys-
tem, to neutralize residual acids and to coat interior with silicate.
3.
Repeat flushing until draining water is clear.
FILLING
1.
Close radiator drain valve (4).
2.
Install transmission oil cooler drain plug (5).
0065 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |