|
|
TM 5-2410-237-23
GOVERNOR AND FUEL INJECTION PUMP HOUSING REPLACEMENT - CONTINUED
0055 00
INSTALLATION
1.
Adjust timing on bench by timing pin method:
a.
Remove four bolts (13) and timing cover (14) from governor and fuel injection pump housing (10). Remove gasket
(15) and discard.
b.
Install timing pin and turn camshaft until timing pins goes in groove in fuel pump camshaft.
14
13
15
387-925
10
CAUTION
Wipe area clean around mating surface of engine and governor and fuel injection pump housing prior to
installation. Contamination of fuel system could result in premature failure.
NOTE
Lightly coat new O-rings with clean oil prior to installation.
2.
Install two new O-rings (12) on governor and fuel injection pump housing (10).
0055 00-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |