|
|
TM 5-2410-237-23
AIR CLEANER MAINTENANCE - CONTINUED
0046 00
DISASSEMBLY
1.
Loosen nut (9), capscrew (10) and clamp (11) from filter body (3) and filter housing (6).
2.
Remove filter body (3) and clamp (11) from filter housing (6).
CLEANING
1.
Wipe filter housing clean with a rag.
WARNING
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure when
drying parts with compressed air. Use a maximum of 30 psi (207 kPa) when cleaning components. DO NOT
direct compressed air against human skin. Failure to follow this warning may result in serious injury or
death. Make sure air stream is directed away from user and other personnel in the area. To prevent injury,
user must wear protective goggles or face shield.
2.
Clean filter body with compressed air, a stiff fiber brush or wash in detergent. Dry all parts before installation.
ASSEMBLY
1.
Install clamp (11) on filter body (3) and assemble filter
6
10
11
body on filter housing (6).
2.
Tighten capscrew (10) and nut (9) to secure filter body
3
(3) to filter housing (6).
387-132
9
0046 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |