 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
CYLINDER HEAD ASSEMBLY AND SPACER PLATE REPLACEMENT - CONTINUED
0025 00
REMOVAL - CONTINUED
10.
Remove and discard cylinder head gasket (6).
CYLINDER HEAD
11.
Use snap ring pliers to remove 18 water seals (7) and
six water seals (8) from spacer plate (9). Discard water
seals.
12.
Remove O-ring (10) from dowel and discard.
13.
Remove spacer plate (9) from cylinder block.
14.
Remove and discard O-ring (11) from hollow dowel in
cylinder block.
6
387-108
15.
Remove and discard spacer plate gasket (12) from cylinder block.
9
10
9
7
11
12
CYLINDER
BLOCK
CYLINDER BLOCK
8
387-109
387-110
CLEANING AND INSPECTION
WARNING
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-
rial. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-venti-
lated areas. Keep away from open flames and other sources of ignition.
CAUTION
Both surfaces of spacer plate, bottom surface of cylinder head, and top of cylinder block MUST be clean
and dry. Do not use hard gasket scrapers or files to remove gasket material, grease or other particles from
cylinder head, block or spacer plate surfaces. These tools could cause nicks or scratches which, in turn,
could cause leaks or incorrect seat between cylinder head and spacer plate, and/or block and spacer plate.
0025 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals