 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
ENGINE TRUNNION REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts
Tools and Special Tools
Detergent (Item 11, WP 0249 00)
Tool kit, general mechanic's (Item 122, WP 0250
O-ring (4)
Shop equipment, general purpose repair (Item 106,
Equipment Condition
Crankshaft pulley removed (WP 0028 00)
Front engine support removed (WP 0022 00)
REMOVAL
1.
Remove three capscrews (1) and trunnion assembly
(2) from front housing (3).
2.
Remove and discard O-ring (4).
3.
Separate trunnion supports (5 and 6) and sleeve (7).
INSTALLATION
3
NOTE
2
If any component of trunnion assembly is
4
damaged, replace all components (trun-
6
nion supports and sleeve) as an assembly.
7
5
1.
Install new O-ring (4) into front housing (3).
2.
Install sleeve (7) into bore of support (5) dry. Install
trunnion support (6) into support (5).
3.
Lubricate inside diameter of sleeve (7) with 3% deter-
gent solution.
4.
Position trunnion assembly (2) on front housing (3)
and install three capscrews (1).
387-104
5.
Tighten capscrews (1) to 75 lb-ft (102 Nm).
1
6.
Install front engine support (WP 0022 00).
7.
Install crankshaft pulley (WP 0028 00).
END OF WORK PACKAGE
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals