 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
REAR ENGINE MOUNTS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts
Tools and Special Tools
Tool kit, general mechanic's (Item 122, WP 0250
Lockwasher (2)
Equipment Condition
Shop equipment, general purpose repair (Item 106,
Engine assembly removed (WP 0021 00)
REMOVAL
1.
Remove two capscrews (1) and lockwashers (2) from
each rear engine mount (3). Discard lockwashers.
2.
Remove rear engine mounts (3).
3
NOTE
Prior to removal of shims, mark posi-
2
tion of shim on frame to ensure cor-
1
rect placement at installation.
Note quantity of shims removed.
3.
Remove shims (4) from frame.
4
387-958
INSTALLATION
NOTE
Place shims on frame in same position from which they were removed. If new shims are required, replace
with shims of same thickness as previously removed shims.
1.
Position shims (4) on frame.
2.
Position rear engine mounts (3) on flywheel housing.
3.
Install two capscrews (1) and new lockwashers (2) to each rear engine mount (3). Tighten capscrews to 150 lb-ft (203
Nm).
4.
Install engine assembly (WP 0021 00).
END OF WORK PACKAGE
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals