|
|
TM 5-2410-237-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 6. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
16. Hourmeter Inoperative - Continued.
g. Place battery disconnect
switch in ON position.
h. Observe meter.
1. If continuity is indicated,
replace hourmeter (WP 0094
2. If continuity is not indicated,
repair open circuit in wire
17. Front Horn Does Not Sound.
1.
Test horn circuit voltage.
a. Place battery disconnect
switch in OFF position.
b. Disconnect light blue lead
from horn.
c. Set
to
appropriate voltage range
d. Connect meter positive
lead to light blue lead and
meter negative lead to
chassis ground.
LIGHT BLUE
LEAD
FRONT HORN
387-903
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |