Flywheel and Flywheel Housing

d . lnstallation. R e v e r s e r e m o v a l p r o c e d u r e a n d

b. Cleaning. C l e a n a l l c o m p o n e n t s i n c l e a n i n g

install the power takeoff drive gears and bearings in

solvent (Fed. Spec. P-D-680). Dry with com-

t h e flywheel housing.

p r e s s e d air or with soft, lint-free cloths.

c. Inspection and Repair.

Flywheel

and

Flywheel

Housing

(1) Inspect power take-off cover for chips,

a. Remoual and Disassembly.

cracks, a n d o t h e r d a m a g e and for distortion.

( 1 ) Remove the engine from the tractor (para

R e p a i r or replace as required.

2-8), and block in position.

(2) Inspect the drive gears for broken or

(2) Remove the starting motor as instructed in

missing teeth, e x c e s s i v e o r u n e v e r n w e a r a n d

5-2410-233-20.

c r a c k s , chips, and other damage. Repair or replace

(3) Remove power takeoff drive gears,

as required.

bearings and cover (para 5-31).

(3) Inspect the bearings and thrust washers

(4) Remove torque divider (para 6-3).

for excessive or uneven wear, cracks, pitting or

(5) Remove all but one of the flywheel

other damage. Replace all defective parts.

inch -

retaining bolts (fig. 5-50). Install a

18NF guide bolt in the crankshaft.