Figure 2-33. Preparing to remove transmission (sheet 2 of 3).

Figure 2-33. Preparing to remove transmission (sheet 2 of 3).

from transmission. Loosen one hose clamp, and

(9) Remove 8 capscrews and remove the drive

r o t a t e oil line out of way.

shaft.

( 1 3 ) Disconnect oil pressure line from trans-

( 1 0 ) Disconnect the transmission oil filter oil

mission.

outlet line and oil cooler oil outlet line from

(14) Install four in. - 10 NC eyebolts in top

t r a n s m i s s i o n (fig. 2-33, sheet 2).

of transmission, and attach a hoist. Remove the

( 1 1 ) Remove the steering clutch control valve

transmission mounting bolts (fig. 2-33, sheet 3).

o i l supply line (fig. 2-31, sheet 4).

(12) Disconnect magnetic strainer oil inlet line