Figure 2-31. Preparing to remove engine (sheet 1 of 6).

Figure 2-31. Preparing to remove engine (sheet 1 of 6).

(9) Disconnect starter ground cable from the

(5) Remove the 8 fan adapter mounting bolts,

starter (TM 5-2410-233-20).

( f i g . 5-7) and lay the fan and adapter inside the

(10) Disconnect the positive cable from the

r a d i a t o r guard.

starter and pull the cable through to the left side of

( 6 ) Loosen fan belts (TM 5-2410-233-20) and

tractor.

r e m o v e the fan belts from engine (para 5-5).

(11) Remove capscrews (fig. 2-31. sheet 2)

( 7 ) Remove 6 bolts and remove the fan drive

a n d remove the floor plates.

( 8 ) Disconnect the fuel supply line (fig. 5-21)

f r o m the accessory drive housing.