 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
BLADE AND PUSHARM ASSEMBLY REPLACEMENT - CONTINUED
0170 00
REMOVAL
1.
Place wood cribbing under pusharms of tractor.
1,2
2.
Remove four bolts (1), lockwashers (2) and open
3
upper radiator grille (3).
3.
Repeat step 2 to open lower radiator grille (4).
4
386-815
4.
Remove nut (5), bolt (6), lockwasher (7) and clamp (8) from tilt cylinder hoses (9 and 10) and radiator guard. Discard
lockwasher.
5.
Remove bolt (6), lockwasher (7) and clamp (11) from
14
9
5,6,7
8
10
tilt cylinder hoses (12 and 13) and radiator guard. Dis-
card lockwasher.
CAUTION
Before disconnecting hydraulic lines and fit-
tings, clean area to prevent contamination and
premature failure of hydraulic system.
NOTE
Tag hydraulic hoses to ensure correct
installation.
Use a suitable container to catch any
oil that may drain from system. Dis-
pose of oil IAW local policy and ordi-
nances. Ensure all spills are cleaned
up.
6.
Remove hose (10) and hose (13) from nipple (14) and
separate hoses.
7.
Repeat step 6 to separate hoses (9 and 12) from nipple
(15).
NOTE
Forming a loop will close system and prevent
dirt and moisture contamination.
386-527
13
12
8.
Assemble hose (9), nipple (15) and hose (10).
6,7 11
15
9.
Assemble hose (12), nipple (14) and hose (13).
0170 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals