 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
RIPPER LIFT CYLINDER REPAIR - CONTINUED
0164 00
DISASSEMBLY - CONTINUED
11.
Inspect bearing sleeve (19) for serviceability. If not
1
22
serviceable, replace lift cylinder.
19
24
12.
Remove seal (20), preformed packing (21) and gasket
23
(22) from head (1). Discard seal, preformed packing
and gasket.
13.
Remove O-ring (23) and backup ring (24) from inner
20
groove of head (1). Discard O-ring and backup ring.
21
14.
Remove seal (25), ring (26) and piston ring (27) from
piston (18). Discard seal, ring and piston ring.
18
27
25
26
386-572
CLEANING AND INSPECTION
WARNING
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-
rial. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-venti-
lated areas. Keep away from open flames and other sources of ignition.
1.
Clean all sealing surfaces and tube assembly connections with solvent cleaning compound and allow to dry.
2.
Inspect internal casing of cylinder and internal parts of cylinder for cracks, wear, scoring and damage. If components
and parts are not serviceable, replace ripper lift cylinder.
3.
Ensure mating surfaces for bearing sleeves are clean and not damaged.
0164 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals