 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
BLADE LIFT CYLINDER REPAIR - CONTINUED
0158 00
DISASSEMBLY
NOTE
Prior to disassembly of lift cylinder, inspect external casing of lift cylinder for serviceability (cracks and
other damage). If not serviceable, replace lift cylinder assembly.
1.
Scribe a mark on head (1) and cylinder housing (2) for correct alignment at assembly.
2.
Remove four bolts (3) and lockwashers (4) from head (1). Discard lockwashers.
3.
Pull piston rod (5) with piston assembly slowly from cylinder housing (2) to allow oil to escape.
4.
Inspect two bearing sleeves (6) for serviceability. Replace bearing sleeves if not serviceable.
CAUTION
Protect piston rod and use care when placing into vise.
5.
Place piston rod (5) into vise and remove self-locking nut (7) and washer (8) from piston rod. Discard self-locking nut.
6.
Remove piston (9) from piston rod (5).
6
2
6
7
8
9
5
1
4
3
386-474
0158 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals