BLADE LIFT CYLINDER REPAIR - TM-5-2410-233-230765

TM 5-2410-233-23

BLADE LIFT CYLINDER REPAIR

0158 00

THIS WORK PACKAGE COVERS

Disassembly, Cleaning and Inspection, Assembly

INITIAL SETUP

Materials/Parts - Continued

Tools and Special Tools

Sealant, quick-cure (Item 29, WP 0184 00)

Tool kit, general mechanic's (Item 112, WP 0185

Lockwasher (4)

Shop equipment, general purpose repair (Item 97,

Nut, self-locking (7)

O-ring (12)

Guide, seal (Item 28, WP 0185 00)

Packing (10)

Inserter, seal (Item 37, WP 0185 00)

Packing, preformed (11 and 14)

Retainer, packing (13)

Materials/Parts

Spacer, ring (15)

Cap set, protective (Item 2, WP 0184 00)

Cleaning compound, solvent (Item 4, WP 0184 00)

Personnel Required

Two

Cloth, abrasive, emery (Item 5, WP 0184 00)

Oil, lubricating (Item 22, 23, or 24 WP 0184 00)

Equipment Condition

Blade lift cylinder removed (WP 0157 00)

Rag, wiping (Item 28, WP 0184 00)

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death to

personnel.

CAUTION

Wipe area clean around all hydraulic connections to be opened during disassembly. Install protective caps

and plugs as needed. Contamination of hydraulic system could result in premature failure.

NOTE

Use a suitable container to catch any hydraulic oil that may drain from cylinder. Dispose of oil

IAW local policy and ordinances. Ensure all spills are cleaned up.

Lift cylinder weighs 242 lb. (110 kg.)

0158 00-1