 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
HYDRAULIC TILT CONTROL VALVE REPLACEMENT - CONTINUED
0150 00
INSTALLATION
NOTE
Lightly coat new O-rings with clean oil before installation.
1.
Position tilt control valve (20) on mounting plate (8).
NOTE
Position machined flats on spool valve so it will align with control lever.
2.
Connect lever (21) to spool valve (22) on tilt control valve (20).
3.
Install two new lockwashers (19) and capscrews (18) to secure mounting plate (8) to tilt control valve (20). Tighten cap-
screws to 60 lb-ft (81 Nm).
4.
Install four new O-rings (15) in bores of manifold (3).
5.
If removed for inspection and cleaning, install new O-ring (17) and plug (16) in manifold (3)
6.
Position manifold (3) and align holes with mounting plate (8).
7.
Install six new lockwashers (12) and capscrews (11) to manifold (3), mounting plate (8) and tilt control valve (20).
8.
Install two new lockwashers (14) and bolts (13) to manifold (3) and mounting plate (8).
9.
Tighten capscrews (11) and bolts (13) to 60 lb-ft (81 Nm).
8
3
13,14
15
17
16
TILT
11,12
CONTROL
VALVE
15
3
8
386-744
386-746
0150 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals