 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
ROPS SUPPORT PADS AND MOUNTING PLATES REPLACEMENT - CONTINUED
0132 00
INSTALLATION
11. Install angle bracket (13) on R.H. plate (8) with two capscrews (20), washers (21), new lockwashers (19) and nuts (18).
12.
Position R.H. plate (8) to right rear of machine. Loosely install six capscrews (16), washers (17), new lockwashers (15)
and nuts (14).
13.
Secure angle bracket (13) to fender with two capscrews (11), washers (12), new lockwashers (10) and nuts (9).
14.
Tighten six nuts (14) and two nuts (9).
15.
Support grabhandle (3) and position at R. H. plate (8). Secure with two capscrews (7), new lockwashers (6), four wash-
ers (5) and two nuts (4).
16.
Secure grabhandle (3) to rear of machine with new lockwasher (2) and capscrew (1).
8
15 14
3
18
19
8
13
11
17
16
1,2
12
10
9
21
386-453
20
4,5,6,7
386-452
17.
If removed, install rear floodlamp.
18.
Install ROPS (WP 0131 00).
END OF WORK PACKAGE
0132 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals