 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
ROPS SUPPORT PADS AND MOUNTING PLATES REPLACEMENT - CONTINUED
0132 00
INSTALLATION
NOTE
Apply antiseize compound to threads of all mounting bolts before installation.
1.
If removed, install bushing (33) and two wedges (32)
on each front support pad (31).
2.
Position shims (30) and front support pad (31) on
machine.
3.
Install four bolts (28) and washers (29) on front sup-
port pad (31). Do NOT tighten bolts.
4.
Repeat steps 1 through 3 to install other front support
pad (31).
5.
Tighten bolts (28) 900 lb-ft (1220 Nm).
33
32
31
30
29
386-477
32
28
6.
If removed, install bushing (27) and two wedges (26)
on each rear support pad (24).
7.
Position rear support pad (24) on machine.
8.
Position two nut strips (25) under mount frame and
install four bolts (22) and washers (23) on rear support
pad (24). Do NOT tighten bolts.
9.
Repeat steps 6 through 8 to install other rear support
pad (24).
10.
Tighten bolts (22) to 900 lb-ft (1220 Nm).
26
27
22
23
386-454
24
26
25
0132 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals