 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
STEERING CLUTCH HUB REPLACEMENT - CONTINUED
0128 00
REMOVAL - CONTINUED
3.
Bend retainer (5) straight from under nut (6).
4.
Remove nut (6), retainer (5) and washer (7) from bevel gear shaft (8). Discard retainer.
5.
Remove clutch retainer (9) from bevel gear shaft (8).
6.
Remove ring (10) from outside and ring (11) from inside of clutch retainer (9). Discard rings.
8
9
7
5
6
386-375
11
10
7.
Install nut (6) on bevel gear shaft (8), with clearance of 0.375 in. (9.52 mm) between nut and steering clutch hub (3).
8.
Install hydraulic puller (12) on steering clutch hub (3) and break steering clutch hub loose from bevel gear shaft (8).
9.
Remove nut (6) from bevel gear shaft (8) and hydrau-
6
lic puller (12) from steering clutch hub (3).
(HIDDEN)
10.
Remove steering clutch hub (3) from bevel gear shaft
(8).
3
12
386-376
0128 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals