 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
STEERING CLUTCH ASSEMBLY MAINTENANCE - CONTINUED
0127 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death to
personnel.
NOTE
Steering clutch assembly weighs 250 lb (104 kg).
5.
Attach a nylon sling and suitable lifting device to rods (8) in brake band (9) clamps. Raise lifting equipment to take up
slack.
6.
Remove remaining capscrew (3) and washer (4) from
3,4
hub side of steering clutch (5) assembly. Remove cap-
screw (6) and washer (7) from flange side.
NOTE
Keep steering clutch assembly level
5
while lifting. Clutch is free to slide out
of outer drum.
8
It maybe necessary to pry inner drum
away from shoulder of the hub.
7.
Lift steering clutch (5) assembly from clutch case (2).
9
2
6,7
386-366
0127 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals