 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
STEERING CLUTCH ASSEMBLY MAINTENANCE - CONTINUED
0127 00
DISASSEMBLY
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death to
personnel.
1.
Use a nylon sling and suitable lifting device to position steering clutch (5) assembly on bench with capscrew side up.
2.
Remove lifting equipment and nylon sling. Remove brake band (9) from steering clutch (5).
3.
Install two lifting links with 1/2-13 x 1 in. bolt in outer drum (11) 180 apart.
NOTE
Outer drum weighs 85 lb (39 kg).
4.
Use a nylon sling and suitable lifting device to remove
outer drum (11) from steering clutch (5).
9
11
5
386-367
NOTE
Steering clutch weighs 160 lb (73 kg).
5.
Attach lifting equipment to steering clutch (5).
6.
Install plate on steering clutch stand. Use lifting equipment to place steering clutch (5) over plate on stand. Remove two
lifting links and bolts.
7.
Install compressor plate over steering clutch (5). Secure compressor plate with retaining nut.
8.
Apply pressure to steering clutch (5) and remove eight bolts (12). Remove retaining nut from compressor plate.
9.
Release pressure and remove compressor plate and four lock plates (13). Discard lock plates.
0127 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals